|
Clothes
Airer Laths
Read
Reviews
From
£24.99
 |
|
|
|
Produced
in the UK from specially selected kiln dried Scandinavian
redwood pine, our clothes airer laths have been
specifically designed to fit most rack ends and
measure 15mm
by 33mm.
Each
lath has a four round top and bottom and is hand
sanded to provide a smooth finish. This ensures
that they will not snag or stain your clothes during
use.
SELECTING
YOUR LATHS: Ceiling airer laths are designed
to be a loose fit to allow the airer to sway in
the ceiling space. When sourcing your laths, it
is best to allow at least a 2mm gap around each
edge so that the laths can adjust themselves inside
the rack ends. This avoids undue pressure on the
rack ends which may break if the laths are too tight.
We
recommend selecting a length which is at least 30cm
greater that the distance between the single and
double pulleys so that the laths can protrude the
rack ends at either end. Our airer laths can be
cut to size if required to ensure the maximum length
for the space provided.
Supplied
untreated, our airer laths are ready to use or can
be stained or varnished as required. We recommend
using this product in a well-ventilated room with
sufficient enough warmth to dry your laundry properly,
and that garments are removed once dry to allow
the laths underneath to breath.
TEN
YEAR GUARANTEE: Our ceiling airer laths
are specially selected from top grade materials
and are supplied 100% defect free. They come with
our ten year guarantee and we will replace any lath
which has not arrived in a satisfactory condition,
or is deemed to be faulty within ten years of receipt.
Please
note that this does not cover cosmetic marks which
may form on the laths during use.
|
