ABOUT
OUR AIRER LATHS
Produced
in the UK from specially selected kiln dried
Scandinavian redwood pine, our clothes airer
laths have been specifically designed to
fit most standard clothes airer rack ends.
Each
lath has a four round top and bottom and
is hand sanded to provide a smooth finish.
This ensures that they will not snag or
stain your clothes during use.
SELECTING
YOUR LATHS: Ceiling airer
laths are designed to be a loose fit to
allow the airer to sway in the ceiling space.
When sourcing your laths, it is best to
allow at least a 2mm gap around each edge
so that the laths can adjust themselves
inside the rack ends. This avoids undue
pressure on the rack ends which may break
if the laths are too tight.
We
recommend selecting a length which is at
least 30cm greater that the distance between
the single and double pulleys so that the
laths can protrude the rack ends at either
end. Our airer laths can be cut to size
if required to ensure the maximum length
for the space provided.
Supplied
untreated, our airer laths are ready to
use or can be stained or varnished as required.
We recommend using this product in a well-ventilated
room with sufficient enough warmth to dry
your laundry properly, and that garments
are removed once dry to allow the laths
underneath to breath.
TEN
YEAR GUARANTEE: Our ceiling
airer laths are specially selected from
top grade materials and are supplied 100%
defect free. They come with our ten year
guarantee and we will replace any lath which
has not arrived in a satisfactory condition,
or is deemed to be faulty within ten years
of receipt.
Please
note that this does not cover cosmetic marks
which may form on the laths during use.
|
